Glass Fiber Covered Winding Wire
Glass Fiber Covered Winding Wire
Glass Fiber Covered Winding Wire
Glass Fiber Covered Winding Wire
+
  • Glass Fiber Covered Winding Wire
  • Glass Fiber Covered Winding Wire
  • Glass Fiber Covered Winding Wire
  • Glass Fiber Covered Winding Wire

Product Overview

Fiberglass Wrapped Wire(Coper/Aluminum)is made by Copper or aluminum conductor evenly wrapped with three or more layers of non-alkali fibreglass.Then it is impregnated incompatible insulating coating of required thermal class,baked to make a whole between fibreglass and conductor.

 

The product has voltage breakdown resistance, more than three grades temperature resistance, insulation thickness can be customized according to customer requirements, widely used in reactors, transformers, motors or other similar electrical products winding.

 

Product Material

Aluminum flat wire should meet the requirements of GB5584.3-2009, and the resistivity at 20℃ is not more than 0.0280Ωmm2/m

Copper flat wire should comply with the provisions of GB5584.2-2009, and the resistivity at 20℃ is not greater than 0.017241Ωmm2/m

 

Production Scope

Aluminum flat wire:Narrow side:1.0mm-8.0mm

Wide side: 3.0mm-25.0mm

Copper flat wire: Narrow side:0.9mm-5.6mm

Wide side: 2.0mm-16.0mm

Aluminum/Copper round wire: ɸ1.7- ɸ8.0

 

Product Advantages

● High quality and low price.

● Sweet safe packing are available.

● Professional production and sales team.

● Double or more type insultaions covered wires.

● Approved IEC & UL certificate standard.

 

Product Application

1.Microwave transformers;

2.Windings with light weight, high conductivity, good heat resistance; Winding used for high frequency signal transmission;

3.Magnetic wire used in High Frequency transformer,common transformer, inductance coils, electromotor, household electromotor and micro-motors;

4. small-motor rotor winding .etc.

5.Magnet wires used in monitor deflection coil;

6. Magnet wires used in degaussing coil;

7. Other special magnet wire.

 

Product Parameter

The insulation thickness and breakdown voltage shall meet the requirements in the following table,or be determined by negotiation:

Name

Insulation thickness

Deviation

Min breakdown voltage/V

(mm)

(%)

Glass fiber covered Copper/Aluminum wire

0.2

±15%

2500

0.3

-15%

0.4

5000

0.5

0.6

0.7

6000

0.8

0.9

After the Glass fiber covered wire is bent on the round rod with the diameter specified in the following table,the cladding shall be wound without cracking to a bare conductor.

Glass fiber covered flat wire

Round rod diameter

Wide side

≦8.00

10*wide size

Wide side

>8.00

15*wide size

Narrow side

All sizes

10*narrow size


Certificates

UL of Magnet wire
3C certification
SCB10-800 - Test certificate of conformity
S11-M-630-Type test
S11-M-630-Test certificate of conformity
Quantity
Occupational health
E-Environment

Customer Visits

Customer visits
Customer visits

Packaging For Shipment

Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping
Packing and Shipping

Chat Log

Chat Log

Factory Workshop

Factory Workshop
Factory Workshop
Factory Workshop
Factory Workshop
Factory Workshop
Factory Workshop
Factory Workshop
Factory Workshop

Areas Of Application

Xuzhou Software Park
Xuzhou Software Park
Xuzhou Software Park
Xuzhou Software Park
Xuzhou University of Engineering
Xuzhou Metro
Vanke City Flower King Court
Outdoor oil immersion
Sunac Huaihai One
Minzu University Science Park
State Grid
Olympic Sports Center

Glass Fiber Covered Winding Wire

Fiberglass Wrapped Wire(Coper/Aluminum)is made by Copper or aluminum conductor evenly wrapped with three or more layers of non-alkali fibreglass.

Glass Fiber Covered Winding Wire
Glass Fiber Covered Winding Wire
Glass Fiber Covered Winding Wire
Glass Fiber Covered Winding Wire
+
  • Glass Fiber Covered Winding Wire
  • Glass Fiber Covered Winding Wire
  • Glass Fiber Covered Winding Wire
  • Glass Fiber Covered Winding Wire


Get A Quote

Note: Please leave your contact information and our professionals will contact you as soon as possible!

Submit

FAQs

Why should you buy from us not from other suppliers?


Our company was established in 2003. The annual production of 10000 tons of magnet wire, the annual production of more than 20000 sets of transformers. The production process is green and low-carbon. Our company to integrity as the concept, to the user as the fundamental, quality and development.

What is the standard of package?


Export standard packages or special packages according to customer requirements.In the absence of special requirements, it is usually packed in wooden cases and wooden pallets.

What is your product scope?


Our products related to power substations, various models of magnet wire, for example,power transformers, substation transformers, single-phase pole-mounted transformers and dry-type transformers etc,also with bare eletromagnetic wire,enameled covered wire,thin film covered wire,fiber glass covered wire,cable paper covered wire, etc.

How long has Yubian been worked in electric industry?


Yubian has been worked in electric industry for more than 20 years.

What is your payment terms ?


30%T/T in advance,70% balance payment before shipment .

How long is your delivery lead time ?


It depends on your product requirement and quantity . Generally , 5~10 working days is available .

What is your MOQ?


Our Transformer MOQ is 1 piece.Magnet wire MOQ is 1000 kg per size.

Do you accept customized service ?


We offer OEM/ODM service , can print your logo on product . our professional technical and quotation team can provide a satisfied project according to your drawing and parameters .

Are you a trading company or manufacturer ?


We are a professional factory with more than 20 years experience in the field of magnet wires,Substation,transformers, etc.Our factory is the excellent supplier of State Grid Corporation in China .

Send Us a Message

Main Features* Note: Please be sure to fill in the information accurately and keep communication open, we will get in touch with you as soon as possible

Submission